5 Most Common Motherboard Problems and Ways to Fix Them

The motherboard of any PC is an essential component that plays a significant role in what other components you can and can’t install during your computer repair in Lake Elsinore or any other location. Motherboards are notorious for being extremely demanding during troubleshooting. But you might even face motherboard issues with a new PC. 

Luckily, a few of the most common problems that you may face with your motherboard are comparatively easy to fix without any professional computer repair in Redlands or elsewhere. You only need to be patient. Let us identify the commonest issues. 

1. 
   

2. 1.Improperly Installed Components 

Components may contribute to the malfunctioning of a motherboard if they aren’t installed properly. In certain instances, your PC may not even get through POST (a self-testing procedure of the PCs during boot-up) or even power it on. The suspects could be the RAM, the processor, and the video card. 

Inaccurate seating of the video card and RAM is likely to be the culprit, as issues in those areas are easy to ignore. Assess the video card, and ensure that it’s uniformly seated across the breadth of the PCI-Express slot. Now, with a firm downward push, be confirmed. 

The two plastic wings of the RAM slot should snap over the sides of each memory stick. They should stand upright 90 degrees from the motherboard’s surface and safely inserted around the tabs on each side of your RAM sticks. The pins and the slot on the processor and motherboard must be accurately lined up. After being inserted, the processor should be flat on the socket’s surface. The heatsink of the processor should attach firmly too. 

2. 
   

3. 2.Not Sufficient Power 

Motherboards have two power connections, a primary 20-to-24-pin connector and a secondary four- or eight-pin connector concealed by the processor socket. Many people ignore the second connector. During your computer repair in North Riverside and other locations, check whether both are properly plugged in. Unplug and plug them back in if you aren’t confident about how well fitted, they are. Ensure that both plugs are completely seated and properly matched with the accurate power supply cords.  

3. 
   

4. 3.No Case Power Button Connection 

As the power button on a device’s case connects to the motherboard through a small, thin two-pin wire, a bent or misaligned pin could be annoying. However, this issue can be remedied with a steady hand and steely resolve. Trying to straighten pins can break them easily and you may need to replace components like your CPU, so think before trying it yourself. 

To solve this problem, you’ll require the manual to verify where the power button connector goes, and you may require a magnifying glass to align the connection accurately with the pins. Else, the motherboard’s manufacturer must have a PDF version of it on the company’s site. Search with your motherboard’s model number. 

4. 
   

5. 4.A Short Circuit 

Motherboards, stuffed with capacitors and soldered connections, route data, and power from one part of the board to another. The motherboard is held aloft from the case by a series of screw-in “standoffs” that are nearly a quarter-inch thick. These exist as the motherboard can shorten if it contacts other metallic components leading to the blowing out of the capacitors to make a physical inspection of components necessary for diagnosing issues. but if you aren’t confident about a soldering gun, replacing your capacitors should be done by professionals. 

Find out the way your motherboard is installed. Confirm that you utilized the standoffs to prevent the motherboard from contacting the case and ensure that any unsupported portions of the motherboard didn’t bend toward the case’s interior. All internal wires should be properly secured with a rubber or plastic exterior. 

5. 
   

6. 5.UEFI/BIOS Hardware Incompatibility 

The Unified Extensible Firmware Interface (UEFI) and Basic Input/Output System (BIOS) connect your computer’s firmware to its operating system to remind your PC what it is and what its responsibility is once turned on, and that includes detecting any hardware errors. 

Motherboards ship from the factory with a BIOS or UEFI to manage contemporary hardware. However, they aren’t guaranteed to collaborate with any hardware that is discharged after they ship. So, you can have a new processor, that’s incompatible with the hardware you’re employing due to the new developments since the motherboard was manufactured. You may need to update to a BIOS or UEFI for it to function. 

Take a backward step by re-installing the old hardware you had disabled to troubleshoot your issue. Once your PC is back to that status, reboot it. With the old hardware, you can boot your computer, go to your motherboard manufacturer’s website, and trace the latest BIOS/UEFI version. After the installation of the latest BIOS/UEFI version, re-install your new hardware. 

Inference 

Some additional steps are also involved to troubleshoot the motherboard. You can always consult an expert for computer repair in South Riverside, or elsewhere if it requires you to carry your computer to a certified technician or call the manufacturer.